Many enterprises in the installation of cold storage, will feel that everything is ok, ignore the daily maintenance of cold storage, which I do not know, a little neglect will cause a lot of influence, even affect the life of cold storage.

How to maintain the cold storage?

1, cold storage board surface maintenance

Dip a soft cloth in a neutral detergent to wipe off the stains on the outer surface of the storehouse; Use a clean and wet cloth to remove the residual detergent on the library board. Dry the board with a soft dry cloth. Do not use rubbing agent and corrosive detergent, do not use alcohol to wipe embossed aluminum plate.

2, the maintenance of sealant edge

Often check the sealant edge of the cold storage door, do a good job of cleaning and maintenance, to prevent the deformation of the glue edge resulting in cold leakage.

3, tension lock seal plug maintenance

It is found that the tension lock sealing plug is lost in the cold storage, and it should be replenished in time to prevent water seal from entering the insulation layer.

4, heating wire maintenance

The manganese ore and the heating wire on the balance window should be ensured to work properly and prevented from being frozen and not working properly.

5. Maintenance of cold storage door installation components

How to manage and maintain the cold storage?

1, the use of cold storage, should be in accordance with the design requirements, give full play to refrigeration, refrigeration and constant temperature capacity, ensure safe production and product quality, maintenance of cold storage building structure. The warehouse management should set up a special team, the responsibility to implement the person, every warehouse door, every piece of equipment and tools, should be responsible for someone;

2, hall and warehouse wall, ground, door, top, etc. shall not have ice, frost, water, there should be timely removal;

3. The exhaust pipe and cold air machine in the warehouse should be swept and defrosted in time to improve the refrigeration efficiency. When defrosting, it must be operated according to the rules, and at least one storehouse should be cleared and one frost should be defrosted. There shall be no water in the water tray and storage of the air cooler;

4, to strictly manage the cold storage door, goods in and out of the storage, to close the door at any time, if there is damage to the door to timely maintenance, to open flexible, close tight, to prevent cold. All the doors that contact the outside air should be equipped with air curtain to reduce cold and hot air convection;

5, prevent building structure freeze-thaw cycle, freeze crisp, freeze heave;

6. When empty, the freezing room and the frozen materials refrigeration room should be kept below -5℃ to prevent freeze-thaw cycles. The cooling room should be kept below zero temperature to avoid dripping water in the storage.

7. Goods shall not be directly spread on the floor for freezing; The method of upside-down stacking shall not be used for removing meat stacks; Decoupling and disassembly are not allowed to fall on the floor, so as not to damage the floor, damage the cold storage insulation layer;

8, there is no floor anti-freezing measures for coolant refrigeration room, its temperature shall not be less than 0℃, in order to avoid freezing heave;

9, cold storage underground natural ventilation should be kept unblocked, no water, frost, not blocked, northern areas to do winter blocking spring open;

Choose a good cold storage management software, so that the tedious business becomes simple and efficient.

Special reminder: details determine success or failure, don't be penny wise and pound foolish, always maintain good cold storage so as to reduce accidents and avoid losses.